embedded systems courses in bangalore

The Significance of Embedded System in IoT


The Significance of Embedded System in IoT

Let’s discuss the significance of embedded system in IoT (Internet of Things). Internet of Things connects embedded system towards the internet, so let’s understand the embedded system before going to IoT. Before choosing the embedded systems courses for your future career, you must aware about the significance of the embedded system in IoT.

Embedded system:

Embedded system is an electronic device, its combination of both hardware and software, the embedded devices perform the specific task for which they are designed. Depending on the applications the embedded device may or may not be programmed in our day to day life we will come across many embedded devices like mobile phones,
smart home controller, CD players, microwave oven and many more.
In this modern world, embedded systems are most attracted device due to some important factors like embedded devices are of very low cost. The power consumption is very low, the space consumption is very low so we can carry them easily.
The embedded boards are supported by different embedded controllers, which are developed using standard hardware and software units. Arduino is the most evolved embedded board, Arduino help to understand the embedded system boards and it also used in the Internet of things. The Arduino architecture is the combination of embedded Atmel controller family through particular hardware towards a board which has a built-in bootloader for plugs and run embedded applications.

Internet of Things:

Internet of Things and devices of IoT are mix with embedded systems and smart things through the internet with different IP addresses which were used to discover and communicate. Basically, IoT is Embedded Systems and elegant substance coupled to the Internet with the exceptional IP address which can be communicated on the Internet. These comprise Sensors external peripheral devices and actuators external peripheral devices. Internet of Thing is the most trending technology in this modern world, where using IoT we can easily control the embedded devices from any location and even from long distance. We can say Internet of thing is the device used transmit the information to people or from one device to other using the internet, the example of the internet of things are amazon echo, home automation, and security and many more. Internet of things have very good scope in the present world, we can say in future many IoT device will come which human life easier. it’s good to have the knowledge of IoT and embedded system and it is the very good flat form to work, so if anyone wants to gain the knowledge in embedded system and wants have practical experience in IoT can join the professional embedded training institute in Bangalore.

The Internet of Things devices can be divided into two broad categories. These are embedded controllers and Wearable controller. One of the examples of this is digital watches. Let’s see some of the important features of wearable devices are.

Better battery life:

As the IoT devices are able to work with very low power, so have the long life of the battery.

Easy to use:

The IoT devices are innovative products for easy to use and for the reality of services.


Contains the proper set of instructions in order to get the real-life examples.

Data security:

assist the devices, it assists as information related things as like to secure the mail applications, secure clouds, and secure browsers.

Easy Managing:

These things can be easily managed, in many applications, these can be handled through phones.
The best platform for embedded IoT is the Arduino. In this platform, users want to set Android through an Ethernet shield. These platforms work with serial communications and develop smart applications with this.
Raspberry Pi is perhaps the greatest thing to ensure in the Internet of Things. Broad series of data drive applications such as the compact disk servers, automation of home server; and file server can be built with the Raspberry Pi. The Raspberry Pi has commonly used these IO pins like Arduino.
Intel Galileo is an extra platform by Intel which chains the Arduino Uno. It is the first Arduino compatible device of Intel devices.
Intel Edison is IoT platform incorporated Wi-Fi and BLE. It covers the place of industries with seventy pin interface. It supports some other platforms like node.js and Arduino.
Don’t get panic on embedded system courses with Professional Training Institute, It is very easy to learn in short periods.

How Embedded Systems Impact Your Everyday Life

embedded training in bangalore, embedded linux training in bangalore, embedded training institutes in bangalore

How Embedded Systems Impact Your Everyday Life:

An embedded system is an electronic device, it is having both hardware and software, that device is used to perform a user application or user is given task. It may or may not be programmable, depending on the application. We are living in the Embedded Magic-World. We are surrounded by many embedded products and our daily life largely depends on the functionalities of these gadgets such us Digital Watches, Smart TVs, Radio, video games, CD player of your living room, Rice cooker, Combo washer dryer or Microwave Oven in your kitchen, Card Readers, Palm devices, pen
cameras of our workspace enable us to do many of your tasks very effectively. Apart from all these, many embedded controllers in your life will take care of many activities like car operations adaptive cruise control and collision warning, the embedded system takes care of Mission Critical Systems (MCS) like nuclear reactor plant, production divisions, a flight control like weather detecting and collision avoidance etc. Which are expected to run continuously for years without errors and in some cases recover by them self if an error occurs? Nowadays Embedded Systems are
an integral part of all aspects of modern life so If you have any confusion in choosing a career I strongly suggest you embedded systems. Don’t study theory only you must go with practical so choose professional embedded training institutes in Bangalore for your practical assistance  Embedded system can be broadly classified into the following four categories:
  1. Standalone Embedded Systems – In this systems, that can work by themselves, in other words, they are self-sufficient, the processing and work are done by themselves. Examples include video game consoles, Music players and Micro ovens.
  2. Real-time Embedded Systems- where the embedded systems give an output within a specific time is called a Real-time Embedded System. They further classified into soft real-time and hard real-time embedded systems.
  3. Networked embedded systems – If an embedded system is connected to a network and their functioning is depended on their network is called Networked Embedded Systems. Examples include security systems and sensor systems.
  4. Mobile Embedded systems- The embedded system is meant for mobile communication are called Mobile embedded system and this includes mobile phones and tablets which is used for a functioning like calling internet etc.,

Here some advantages of Embedded systems are

  • There is no need to update the hardware
  • Concentration on user applications.
  • The flexibility of operating system requirements.
  • It occupies less area and low memory. So, it consumes less power.
  • Cost- Effective.

Where we used the Embedded Systems?

The Embedded Systems are widely used in all our daily applications around the world. Here, some applications are
  • Consumer electronics – Mobile phones, video game consoles, printers, Blu-Ray players, home entertainment systems, televisions, digital cameras, music players.
  • Household appliances – Washing machines, microwave ovens, refrigerators, dishwashers, air conditioners
  • Medical equipment – CT Scanners, Electrocardiogram (ECG), MRI Scanners, blood pressure monitors, heartbeat monitors
  • Automobiles – Electronic fuel injection systems, Car navigation system, Anti-lock braking systems(ABS), Pre-crash safety system, in-vehicle entertainment systems, air-conditioner controls.
  • Industrial applications – Assembly lines, multiple parameter monitoring systems, feedback systems, data collection systems Aerospace – Navigation systems, guidance systems, GPS Communications – Routers, network hubs, satellite phones.
Embedded systems are vital to the society, that they enable designing and gives the benefits from the technology while minimizing the cost and power consumption. Without embedded systems, our world looks like a vastly different than it visible today. This is time to choose an embedded systems courses in Bangalore for your career. As technologies and movements like the internet of Things, industrial applications, Smart homes and vehicles will become more and more important.

About A Professional Embedded Systems Training in Bangalore

We are the top authorized embedded system training institutions in Bangalore, With Professional Training Institute, we are the Best embedded training in Bangalore. This organization is run by Yogesh Kumar Sharma, he is having 15+ years in an embedded development and Master in embedded design from Manipal University. While working He was taking interview of many candidates and found that very fewer candidates are having proper knowledge or understanding of the embedded system, the full life they are struggling to get a good job, even many are struggling to have the start of the job.

Best Embedded Training Institutes in Bangalore

Best embedded training institutes in Bangalore, embedded systems training in bangalore

Best Embedded Training Institutes in Bangalore

Embedded system is one of the very important fields where Electronics, the student can work. This embedded systems filed is having the very waste opening and till now never had the recession in this filed. Salary in the embedded filed is very high, normally 6-7 years candidate is easily crossing 10 LPA if He/she is having knowledge.

About the Best Embedded Training Institutes in Bangalore

Before we go into deeper into embedded system let me introduce who we are? What do we do?

We are the top authorized embedded system training institutions in Bangalore, we are Professional Training Institute,  A practice of the best Embedded training in Bangalore our organization is run by Yogesh Kumar Sharma, he is having 15+ years in an embedded development and Master in embedded design from Manipal University. While working He was taking interview of many candidates and found that very fewer candidates are having proper knowledge or understanding of the embedded system, the full life they are struggling to get a good job, even many are struggling to have the start of the job.

With the motive to help student until they are not getting the job, this training institute is started. Here mainly we focus on practical learning of embedded system/C/Linux etc. our student is capable to face any kind of interview with full confidence. We not only focus on technical knowledge but we also work on communication skills, motivational environments, logical thinking, accept a new challenge.

About the Embedded Systems Courses in Bangalore

The essential things to learn about the embedded system programming. An embedded system is a combination of both hardware and software, the embedded system relies heavily on the program so itis necessary to the programming basics.

In our Professional Training Institute, we are going to teach about the full contents of embedded systems and we will mainly focus on the Practical and theoretical knowledge on the advanced level of Embedded system. We will take care of getting good knowledge on Embedded system by giving multiple examples and providing more number of questions to be practiced.

First, we will teach about the basic electronics, digital electronics and then we will focus Microcontroller because microcontroller is the heart of the Embedded system. In microcontroller we will be covered about the Architecture of 8051, Pin description of 8051, General purpose registers, special function registers, addressing modes and etc.,

We also focus on programming the microcontroller like small tasks such as blinking the led with the help of the microcontroller, programming the controller while interfacing the seven segment display, interfacing with LCD and Keypad and the DC motors.

By interfacing, different devices will train the students by giving multiple tasks and also we can do small projects by combining all of these devices. The student can easily interface the controller with other devices and can control all that devices by programming.

Then we will be focused on the communication and Protocols such as I2C which will interface to PC read/write byte/string by using Keil application like-wise interfacing SPI to RTC, etc…

Once the student understands the embedded system completely then we move to ARM cortex core. We normally use STM32F for training purpose. We give guidance to the student how to use this controller and assign the project on this microcontroller.

After this, we will be focused on the Wireless Modules such programming with the GSM, GPS, RF, IR wireless module, Bluetooth, RFID, WIFI and ZigBee Modules. So using this module we can control the devices like Motors, sensors etc., with the help of programming.

Now the student is having enough knowledge to make any kinds of embedded project, we just start assigning them small to mid-level projects, based on individual capability. Our student is ready to face any kind of interview in the Embedded system.

Learn More

How to Choose Best Embedded Training Institute in Banglaore

Best Embedded Training Institute in Bangalore, embedded linux training in bangalore

How to Choose Best Embedded Training Institute in Bangalore

Hello friends, let’s see how to choose the best training institute. When it comes to choosing something we should be brave enough to decide does it can serve us the purpose. Nowadays most of the student wants specialization in their courses, as many training institutes are opened, its tough job to decide a correct institute. Students look for training institute to make themselves strong so they can face the world. Many training institutes are just open a shop, they don’t have feeling or passion they just to grab the money and even don’t bother about any other thing. I can know from one student that one institute took full course fee in advance and given books to read self, no class.. ha ha ha. So we will help, how to choose the best embedded training institute in Bangalore.

Now let’s see some important points to keep in mind before deciding an institute.

You can choose the best embedded institute in Bangalore based on the following main points:

1) Faculty Teaching Methods
     a. Demo Class
     b. Personal Interaction with the student
     c. Test and evolution
2) Past Students Feedback.
3)Past Placement Records.
4)Practical Teaching and Lab Facility.
5)Real- Time Project.
6)Fee Structure.
7)Personality Development.
8)Fishing – Be aware of Fake Institutes.

1) Faculty Teaching Method:

It’s a very important thing to check the teaching quality of the faculties of the particular institute. Below points will help you to decide the quality of teaching method in institutes.

a) Demo class:

Most of the institutes now days providing the demo classes which helps the students to get to know about the institute environment and their teaching method. Usually, many institutes provide 3-5 days of demo classes, it’s quite enough time for students to take a decision.

b) Personal Interaction with the Student:

As each student are different from one another, faculty should be aware of each students learning skills, grasping power and understanding level. So it’s very important that faculty should be interactive with each student in class it will help the student to achieve their goals.

c) Test and Evolution:

By test and evolution method faculty can come to know how much they have improved by training. So the faculty can give more attention to bring out the best from students.

2) Past Students Feedback:

Students should check the past students feedback about the institutes before they join any institutes. By past student feedback, students can come to know about the institute teaching method and all other things of that institute.

3) Past Placement Record:

To choose the best institute it’s important to know to past placement records. We should evaluate the best Embedded systems training in Bangalore what the percentage of students got placed in the same field. By this, we can decide the quality of teaching of the institute.

4) Practical Teaching and Lab Facility:

Class teaching not fully helps the student to understand the subject, if they do practically they can understand the subject in deep. So good institute should have practically teaching method and lab facility.

5) Real-time Projects:

By making the real-time projects can implement their knowledge and they will come to know real-world challenges, it will give hands-on experience.
Once they are applying for the job they will check for real-time projects experience. So good institutes should provide a minimum two real time projects in various fields to their students to make them confident to work in the real world.

6) Fee Structure:

When it comes to many everyone thinks twice. Some institute have high fee structure some have very low fee structure it’s not true that the all institute having the high fee is good or institute having low fee not good. We cannot decide like this. We suggest joining a good institute which has all features as so far discussed even though the fee is high. As because we can get money any time even though it’s difficult for many students to arrange as because the good quality of teaching is important. If you join the institute which is not good then it’s no use, all your time and money is waste only.

a) Installment Payments

Our suggestion is you look for training institute which is good and allow to pay the fee in installments, if pay the full fee and you come to know that institute is not so good for you then you cannot change or leave that institute. Installment payment method also helps students financially.

b) Less Fee

The fee structure should accessible for everyone if providing low fees means we have to think twice why they are providing the low price.

7) Personality Development:

Training institutes should provide personality development programs for each student to make them ready to face interviews. Even though lot off students have good knowledge but they will have fear to face interview so training institutes should provide personality development programs.

8) Fishing – Be aware of fake institute:

The students should be aware of fake training institutes and their promises. Many institute promises they provide 100% placements and high quality of teaching which will be not true, so students should check for these things before they join any training institute.

Professional Training Institute- The best-embedded training institutes in Bangalore

So, at last, we can tell you that before joining any training institute you check for all above-mentioned features and take the decision which institute will fit you the most because it’s one important decision of your life India as a growing country, we have a lot of opportunities in Embedded field. Places like Bangalore, Hyderabad, Chennai, Noida..etc have a lot of embedded training institutes. In the case of Bangalore, we have a lot of opportunities to get trained in embedded courses in Bangalore. Engineering graduates who are passionate to make their career in embedded systems, who is planning to join embedded training institutes in Bangalore they will well be trained from these institutes. For this reason, students have to grab the best-embedded training in Bangalore as well
as the latest technologies in this field by these institutes.


Latest Technologies in Embedded Systems

Latest Technologies in Embedded Systems, embedded systems training in bangalore

Latest Technologies in Embedded Systems

Hello friends,
Embedded system is the ever-green buzz in industries, unlike any other field in embedded the system also we are having many developments every day. Technology is every day changing, the embedded system is also in the same boat.
Today here we are going to discuss Latest Technologies in Embedded Systems, that is changing the world. Anybody who wants to make a career in the embedded system should be aware of the latest development and advance technology entered into the embedded system.
So let’s explore the latest technology.
  1. Artificial Intelligence
  2. Virtual and Augmented Reality
  3. IOT
  4. Cloud Connectivity and Bluetooth Mesh Networking
  5. Machine learning/Deep learning
  6. Multi-core Processor technology
  7. Sensor technology
  8. Safety and security
  9. Networking and communication

Some of the Latest Technologies in Embedded Systems

1) Artificial Intelligence:

Artificial Intelligence is also known as Machine Intelligence, and it is demonstrated by Machines. Artificial Intelligence is covering that how computers can make decisions as well as Humans. Artificial Intelligence is a research that defines that the study of “Intelligent Agents” and that agent should make their own decisions based on the situations. A machine can act and react like a human.
Artificial Intelligence is a way of making a computer, computer controlled Robot and a software intelligent thinker its similar to human thinking. The word Artificial Intelligence comprises of two words “Artificial” and “Intelligence”. Artificial refers to something which is made by the human or non-natural thing and intelligence means the ability to understand or think. Here, an agent is an anything that can be viewed as perceiving its environment through sensors and acting upon the environment through effectors. A human agent has eyes, ears and other organs for Sensors, and hands, legs, mouth and other body parts for effectors. Here, the Robotic agent substitutes Cameras and infrared range finders for the sensors and various motors for the effectors. A Software agent has encoded for its percepts and actions.

2)Virtual and Augmented Reality:

Virtual reality(VR) is a way to create a computer-generated environment which can be explored and interacted by a user that make the user into a virtual world. The definition of ‘Virtual’ is near and ‘reality’ is what we experienced as human beings. So, the term ‘Virtual reality’ basically means ‘near-reality’.
Augmented Reality turns the environment around you into a digital interface by placing virtual objects in the real world. Augmented reality continues to develop and become more passive among a wide range of applications. Augmented reality uses the existing real-world and puts an virtual information on top of it to enhance the experience. Whereas, the virtual reality makes users making an entirely different environment altogether as a virtual one.


IoT is an Internet of Things and it involves extending internet connectivity over different devices such as desktops, laptops, smartphones, and tablets. The devices can communicate over the internet with Embedded technology. The ability of data transfer over the network without the requiring human to human or human to computer interaction.
Nowadays, the IOT application will rapidly increase very highly. These IOTs are being established relating to Automobiles, home appliances, medical and care, transportation and industrial purpose. An IoT is a Web-enabled smart device that uses embedded processors, sensors and communication hardware to collect, send and act on data from the environments. IoT will perform in our daily life applications such as automatic door locking system, automatic power management, automatic vehicle speed management etc,

4) Cloud Connectivity and Bluetooth Mesh Networking:

Cloud connectivity utilizes several quick connections and security protocols that facilitate to Leverage data storage, network, computer, and user interface. Initializing cloud connectivity and employing it to transform a business is a difficult task.
The cloud connectivity solution providers ensure that they are improving the time to market and total cost of ownership. Cloud connectivity provides fast, secure, and reliable private connections to public cloud services. It will provide reliable, low latency network performance and simplified scaling of all services.
Bluetooth mesh networking is a protocol based upon the Bluetooth low energy that allows for many-to-many(m:m) communication over the Bluetooth radio. Bluetooth technology is a secure wireless connectivity and also supports the mesh networking. The mesh capability enables many to many device communications and is optimized for creating large-scale device networks and it is ideally suited for building automation, sensor networks, and tracking solutions. It is a low power radio technology.

5)Machine learning/Deep learning:

Machine learning is a major application in Artificial Intelligence that provides the ability to learn automatically and improve from experience without being explicitly programmed, it is mainly focused on the developing the computer programs, that can access the data and learn it for themselves. Machine learning always tried to increase the accuracy but it doesn’t not about the success but in AI always tried to increase the success, not accuracy.
Machine learning is the ability for computers to learn and act without being explicitly programmed. Machine learning is a branch of science that deals with programming the systems in such a way that they automatically learn and improve with experience. Here, learning means recognizing and understanding the input data and making decisions. Algorithms are developed for making all the decisions based on all possible inputs. There are two ways for analyzing the Machine Learning Algorithms.
  • The first is a grouping of algorithms by the learning style.
  • The second is a grouping of algorithms by a similarity in form or function.
There are many ways to implement machine learning techniques, however, the most commonly used ones are supervised and non supervised learning.
Supervised learning deals with learning a function from available training data. There are many supervised learning algorithms such as neural networks, Support vector machines(SVMs), and Naive Bayes classifiers. Mahout implements Naive Bayes classifier. Basically here the input data is called training data and it a known label or result at a time.
Whereas Unsupervised learning makes sense of unlabeled data without having any predefined datasheet for its training. Common approaches to Unsupervised learning include:: K-means, Self-organizing maps, and Hierarchical clustering. whereas Unsupervised MachineLearning, input data is not labeled and does not have a known result.

6)Multi-core Processor technology:

Multiprocessor core processor is a single computing system which will perform multiple operations parallelly means this processor contains two or more processing cores. These cores will operate as an individual to boost the performance without raising the clock range and reducing the heating problem. This Multi processor will provide higher performance without driving up the power consumption.

Most modern systems have at least two cores(Dual Core) or four cores(Quad Core), six core(hexacore) or eight core( Octa core) Processors. By adding the multi-core processors, these boost the substantial performance over a single CPU.Intel AMD both have the Quad core processors. Nowadays, everyone showing interest and implementing the Multicore technology only here Multiprocessor core technology is widely used many applications like General

Purpose, Embedded domain, Network domain, Digital signal processing(DSP) and Graphics(GPU).

7)Sensor technology:

Sensors are the devices that are frequently used to sense and respond to electrical or optical signals. Usually, the output of the sensor will be in the form of an electrical signal or an optical signal. Sensors are devices that measure the physical parameters (for example Speed, temperature, humidity, sound, light, and pressure) and converts them into signals which can be which can be measured electrically. Here, the data such as pressure, light, and the temperature is an analog data and this data will be converted into Digital signals (because the processor will understand the digital signals only) by using the ADC converters.
In our daily life, we use different types of sensors in various applications such as LDR sensor, PIR sensor, the infrared sensor, ultrasonic sensor and temperature sensor etc.
For example,
  • The temperature sensor(LM35) is used for measuring the analog output voltage(in Celsius)proportional to the temperature.
  • DHT11 and DHT12 are used for determines the humidity and temperature values serially with one wire protocol. The DHT11 sensor uses a resistive humidity measurement component and NTC temperature measurement component.
  • IR sensor is an application for wireless communication, the IR sensor will emit a visible light but it is not visible to our human eyes. The electromagnetic spectrum band for IR rays will be in the range of 300GHz to 430THz. IR communication is used for short and medium communication.
  • Ultrasonic sensor generates the Ultra-sound waves. When this Ultra-sound will hit an object, it reflects as echo which will be sensed by the receiver.
  • PIR Sensors will be used to emit the heat in the form of infrared radiation into their body also called as thermal radiation.

8)Safety and security

Security is one where the features are inaccessible to unauthorized users, therefore the system will be protected. While safety needs to be secure the systems. Safety and security is the major one for protecting the data and technics which was developed from the other developers and hacker.
Nowadays, everything has gone to hacking easily that why our embedded technology is looking for good security and safety. So while designing any system we need to take care of the security mainly. If you design any product without security, this product will be copied by another company by adding some more features. So it is important for designing any product with security.

9)Networking and communication

Networking consists of two or more resources and is used to share the data and exchange the files.mainly in systems networking will be used to share the data in between the multiple systems. Networking is a protocol which used for distributing the packets in different paths to obtain the fastest response and reducing time consumptions. Here so many networks will be used such as LAN WAN MAN WLAN
LAN means Local Area Network which occupies less area and in that certain area, it will share the data in between the resources. It is generally limited to a geometrical area such as school, lab, and building.
WAN means Wide Area Network which occupies large area such as a world or countries etc, here the main example is the internet the data will be shared throughout the world within a second.
MAN means Metropolitan area which occupies the large area when compared to LAN system and less area when compared to WAN such as cities and data will be shared in a certain area that some cities or places. MAN network will be used by some companies to make their own infrastructures.
WLAN means Wireless Local Area Network which is based on LAN with wireless Wifi network.
Communication is a mechanism of data transferring between the resources and there are using different communication techniques like serial and parallel communication. SerialCommunication means the data will be transferred from source to a destination in a single way. While the parallel communication means the all the data will be transferred at a time in a different way. Here, the number of bits is equal to the number of transmission ways.
Where some of the serial communication used in the Embedded systems are CAN Protocol, I2C protocol, SPI Protocol, USB protocol.
I2C means Inter-Integrated circuits protocol which was originally developed by Philips Semiconductor. I2C is a serial protocol for two-wire interface to connect the devices like a microcontroller, Memories, A/D and D/A converters, I/O interfaces and other similar peripherals in embedded systems. In this protocol there available one Master and multiple slaves to data transfer.
Serial Peripheral Interface is a Synchronous Serial communication and it is used for short distance communication. SPI was developed by Motorola in the 1980s.
USB means Universal Serial Bus and it is used to transfer the data from source to destination
through serially.

Best Embedded Systems Training in Bangalore

India as a growing country, we have a lot of opportunities in Embedded field. Places like Bangalore, Hyderabad, Chennai, Noida..etc have a lot of embedded training institutes. In the case of Bangalore, we have a lot of opportunities to get trained in embedded courses in Bangalore.  Engineering graduates who are passionate to make their career in embedded systems, who is planning to join embedded training institutes in Bangalore they will well be trained from the institute. For this reason, students have to grab the best Embedded training in Bangalore as well as the latest technologies in this field by these institutes.

Advantages Of Embedded Systems

ADVANTAGES OF EMBEDDED SYSTEMS, embedded courses in bangalore

Advantages Of Embedded Systems

An Embedded system is an electrical system it is combination of both hardware and software. At presently embedded system is in growing stage. Embedded systems are used everywhere. They can be found in vending machines, cameras, mobile phones, in vehicles like airplanes and cars and in many toys we can find embedded system. Embedded systems can be also used in medical supplies and industrial machines and in agricultural. Furthermore, they are found in architectural applications commercial.
Embedded system are like a small computer, they can do same task which computer are doing with many more advantages. Here we are listing the advantage of embedded system as a embedded training institutes in Bangalore.

Some of the Advantages Of Embedded Systems:


The size of embedded System are very small as compared to computer/other computational products. Embedded products are designed for particular application, and the components required to design these products are very less so the size of product will be small. Mainly the Embedded products are mantes for one task. Embedded product do only one task in their life time. So the size of embedded system is very small. This is the great advantage of Embedded device.


The power consumption by embedded devices to operate is very low. Unlike personal computer is powered up with 230 V AC and consume approx. 60 W of power, embedded system are powered up with 3.3 V/5 V / 12 V. Total power consumption of embedded system is less than 1 W/ or similar.

Real time Device:

The embedded devices are also called Real time devices, as the response of the embedded devices is very instant. Real time means, embedded system will respond to the action at very minimum time. Consider the airbag system, in case of accident, airbag has to open in shot time duration, this is possible with the help of real time embedded system. There are many application where device has to respond in real time, like missile tracking system, mobile
switching device, network switching device.


The operation performed by embedded systems are more accurate as they are designed using the advanced software’s. Accuracy of embedded device is the key factor to perform its operation correctly, consider a device like insulin injection pump, amount to insulin to be injected must be accurately calculated and injected, and any mismatch can lead to impact on human life. Similarly we have many critical system which need to have accurate measurement, and calculation.
The embedded devices can be interfaced with other systems. As embedded systems are designed in simple format so it is very easy to use embedded devices. And they can be easily handled.


Since size of embedded device is very small they can be carry many embedded devices wherever we want. Even many embedded device working in a cascade mode, so any number of device can be cascades. Devices are portable.


the price of embedded devices is very low as compared to other computational devices. That make prominent used of embedded device in multiple application. Modern controller is required very less external component so the price is further low.


Normally embedded systems do only one task at a time, so it loads very faster from Chip or FLASH memory. So the speed of embedded system devices is very high. Even the multitask controller is very fast it works with the speed of GHz so that it will finish task in Nano seconds.
Embedded system is having many advantages it will defiantly a great device which help everyone like Industries, student, college, company. Embedded system is having many job opening across the globe, Even in India embedded system is one of the best field to work. This is the safest place to work for women and man. But any fresher will only able to enter into job when he/she is having best knowledge in embedded system. Best knowledge can only we

About The Best Embedded Training in Bangalore:

We at professional training institute committed to deliver best embedded training in Bangalore through practical embedded system. Our unique teaching method focus on practical and hands on training to student, so that
they are able to fact any kind of interview in embedded system.
So come and explore the new possibilities.

How to choose your career path?

How to choose your career path?

Wow, this is a nice Question. As per embedded systems training in Bangalore, there is two type of peoples, how to choose their career carefully and spend full life with it. The other type of people keeps thinking why they doing this job, they always want to change their job, their fields. jobs/field changing story never ends even after changing job. Why? At the other end people who choose their career by taking the conscious decision they day by day, step by step in their life. Why?

See answer is simple, once we able to think what we want to do in the future, or what makes us happy then we can spend full of our thinking and thoughts into our work. When give our full attention to any work, day-night, walking- sleeping then defiantly slowly, step by step we conquer the subjects. once we have held on our subject then Freedom of life begins. We will become from thinking like – what will happen in future? what I will do in future, how will be my career?

So once we have a deep understanding of our subject become free, Moreover if our career is also in the same field then we become Wow.

whatever said it is from my own experience, as I am Embedded professional and offering embedded systems courses in Bangalore. Working in the development of new embedded products. When I started my career that time I was also thinking which career I have to choose? what I have to do in the future? I want to choose the career such that I will not have any problem of job in future and My salary/income should keep growing. When I did some self-analysis I found that I enjoy doing something real and visible work. So I decided to work in the Electronics field. Now I am having around 15+ years of experience in Embedded field. I started own Training Institute because I love teaching, I entertain my student and many difficult concepts I explain them in an easy manner. I really enjoy my class and my teaching methods. Our students are also happy and able to give their 100% learning. So together I and my student are able to achieve 100% placement records till now.

If you are an electronics engineer and you don’t know how to build your career in Embedded filed you discuss with us, for other peoples can I say just find out what you like? what you can do in future and feel? it is not about one time, it is about day-by-day till the end of life.
Hope it will help you in some manner.
So best of luck for your future – Professional Training Institute.

Scope of Embedded Systems

scope of embedded system, embedded training institutes in bangalore, embedded systems courses in bangalore

The Scope of Embedded System

Applications of embedded systems have increased over past years. Multi-core technologies are being developed and are now in great demand across the various industry. As an embedded training institute in Bangalore, we discuss the scope of embedded systems.

Many students are not aware of opportunities available in the field of Embedded systems. Most graduates go after the IT industry to seek the career. The reason may be lack of awareness. Many students may not across the name Embedded Systems or they may not be aware of what is an embedded system, what knowledge and skills required to build a career in the field of embedded systems, which companies are working in this field.

All leading companies are working in Embedded field. Some of them and the products are given below

Siemens-They make products in the field of automation industry, medical electronics. They are radiology machines, scanner, Doppler, cardiograph machines.

Samsung – they make mobile phones, consumer electronics like a washing machine, microwave oven, television, air conditions etc. This the embedded device will be made of a microcontroller, its associated hardware, and software for intelligent temperature sensing.

Bosch – makes all automotive products.

The main field where Embedded System is used are as follow:

1. Automotive

Automotive technology is a program of study that focuses on mechanics and technology that drive today’s vehicles. In automotive systems, more equipment is being changed from mechanical systems to electronic systems.

Embedded system is the heart of a vehicle’s electronic system due to its versatility and flexibility. Revolution of electronics has manipulated in automotive design including fuel combustion, powertrain crash protection, etc. Advanced use of the embedded system in a vehicle can help in controlling pollution, increasing the facility to provide systems monitoring features that consumers demand. The embedded system is an integral part of automotive safety systems, that may be an anti-lock braking system, electronic stability control, automatic four-wheel drive.

Application of Automotive Embedded: Embedded Airbag System, Embedded navigation system, Embedded Rain-sensing system, Embedded Based Automotive Parking System, Music system, Equivalent control, GPS, anti-locking braking system, fuel injection controller device.

2. Aerospace/Avionics

Embedded system is essentially a black box that performs functionality for the application system.

Application of Aerospace Flight attitude controllers, space robotics, automatic landing systems, navigational system, space explorer.

3. IOT

IOT is the Internet of Things. The Internet of Things refers to the growing network of physical objects that feature an address from internet connectivity, and the communication that occurs between these objects and other internet-enabled devices and systems. In other words, IOT is nothing but devices connected to the network wirelessly to the network have the ability to transfer and receive data. Is a method of controlling appliances automatically for the convenience of users. This makes life easier for the user and saves energy by utilizing devices based on requirements. Controls can be as basic controlling lights with a remote or as complex as setting up a network of items in the home that can be programmed using the main controller or even via cell phone from anywhere in the world or by voice control.

Sensing Requirements: Designer needs to decide the sense required to perform the specific task. One should also need to assess the sensor specifications required for different needs and usability in different environments. Below is the sensor that is commonly used
1. Thermostats can be used to control air conditioners, refrigerators, geysers, heating system, or in case of fire.
2. Humidity sensors sense the moisture level in the environment.
3. Gas sensors can be used to detect gas leaks.
4. Light sensors can be used to detect the luminous intensity in the house.

Information provided by these sensors is used by the processor to make several important decisions regarding the appliances and when to switch them ON or OFF.

Most commonly used devices in IOT application are Arduino, Raspberry Pi etc. The networking, communication, and protocols used to depend on the IOT application. There are many communications protocols like MQTT, CoAP, DTLS. Wireless protocols include Zigbee, Bluetooth Low Energy.

Application of IOT smart home, smart city technology, security system etc.

4. Industrial Automation

All products that we use in our day to day life are all embedded products. Embedded is been growing in the field to automation.
Application of Industrial automation is voltage, temperature, current, hazard testing system, data collection system, assembly line, monitoring system on pressure.

5. Medical

Embedded system is becoming a great interest in the medical field. Due to the Embedded system, everything in the embedded system has become too simple operation all have become too simple. Patients hospitalized needs constants attention, that can happen using the medical embedded system. The sensors give data regarding patients health, such as heartbeat and these signals are sent wirelessly to doctors.

Most recently products are manufactured in the medical field that is IoT based patient health monitoring system over the internet and another one is Heartbeat monitoring system

Application in Medical field Medical diagnostic devices: ECG, EMG, MRI, EEG, CT scanner, BP Monitor, Glucose monitor.

6. Telecommunication and Networking

Embedded systems become more complex and should have knowledge in various disciplines such as electronics, data processing, telecommunications, and networks. This choice is easily justified by the fact that embedded systems are today massively communicating and that telecommunications and networks constitute the main sector of embedded systems.

Application in Telecommunication and networking are the Cellular phone, web camera, hub, router, IP Phone and etc…

7. Security and Safety

Nowadays Embedded system is used for Security safety system. Many Embedded security products are coming to market which we are using in our day to day life. In many homes, they are using the safety locking system. More advanced products are also there like face, eye recognition system.

In your mobile, many safety secure features are been introduced like safe pattern lock system, the more upgraded feature now we can find in mobile is fingerprint recognition for security not only that advance camera are also there.

Application in security and safety Building security system, face recognition, airport security system, eye recognition system, alarm system, finger recognition system, etc.

8. Defense

Embedded has deployed products in the military field. All products are available in extending operating temperature versions, all of them provide high-performance networking features and power-efficient performance. Embedded has deployed products in the military field. All products are available in extending operating temperature versions, all of them provide high-performance networking features and power-efficient performance.

They have designed single board computers that are used in military applications including UAR controllers, fire control system and ruggedized routers. Signal board computers are available such as PMC and PC/104 which are commonly used in military applications. Also, their small customs form factor boards that are used in application such as UAVs. Application of Embedded system in Defence like manufacturing of Drones, satellite monitored LASER.

9. Agriculture

Today farmers are required to harvest maximum from small land. Hence field required something remarkable like embedded system. Farmers need to have the sound understanding of climatic conditions and need to change farming process depending upon climatic changes.

In the upcoming days’ main aim of this system to solve labor issues by coming up with robotic which will help farmers in farming. Currently, many countries developing driverless tractors using real-time kinematic and GPS that would be effective and cost-efficient to use in farmlands.

At the Embedded World 2013 shows using Smart Farming as an example- will demonstrate how the interaction of machines in the cyber-physical system operates safely and securely.

10. Consumer Electronics

Some company like Samsung, Bosch manufacture many consumer electronics products.
Application in the field of Entertainment Video games, mp3, mind storm, smart toy, television, air condition, washing machine etc.

Choose the Best embedded systems training in Bangalore

We are Professional Training Institute focus on the Practical hands-on embedded training course in Bangalore, so that student gain maximum knowledge in the field of the embedded system. Our student is having knowledge of more than Experience peoples gains in during the same amount of time duration. Contact us and explore in more details that how Professional Training Institute can change your knowledge and life.

More Tags: embedded training in Bangalore | embedded Linux training in Bangalore | embedded systems training in Bangalore | Linux device driver training in Bangaloreembedded courses in Bangalore | c programming classes in Bangalore

Types of Embedded Systems

Hello friends,
Embedded system is the ever-green buzz in industries, but as understand with my few recent communication with many students even few working professionals does not know about the embedded system. Here I will explain what is embedded system? What all are the types of embedded system? Where you can get a job in an embedded system? What is the job opportunity in an embedded system? How you can learn the embedded system? and etc.
So what is embedded system? This most common question asked by our student. Embedded system is a combination of Hardware and software.

Types of Embedded Systems:

The combination of hardware and software in a system, we can call as the embedded system. In any electronic system, it requires a hardware platform which is made by a microprocessor or microcontroller. The Embedded system hardware consists of the user interface, Input / Output interfaces, display, and memory, etc. Usually, an embedded system consists of following elements which are shown in below figure.

embedded courses in bangalore

Embedded system can be classified into different categories based on their performance, requirements for the operation, the performance of the microcontroller.

Types of Embedded Systems, embedded systems training in bangalore

Embedded systems are classified into 4 categories based on their performance and functional requirements.

  • Standalone
  • Real-time
  • Networked
  • Mobile

And based on their performance of microcontroller this field is again subdivided into

  • Small-scale
  • Medium scale
  • Sophisticated

1. Standalone:

In this category, systems don’t need any host like a computer. It can work on its own. It will receive the inputs through its input ports and calculate it and gives the output through output ports. Examples for this types are a microwave oven, digital camera, DVD players, etc..


These type of embedded systems will give the output in particular time. All these works will finish within the deadline of time. Examples for this, we use real-time embedded systems in avionics, railway, ships, traffic control for highways, automotive etc.


These type of embedded systems will receive the resources (data as inputs and output) by using a network. It can be LAN, WAN or internet, wired or wireless. This is the fastest growing working field. The embedded web server is a system wherein all embedded devices are connected to a web server and accessed and controlled by a web browser. Example, Home automation using LAN networking.

4.Mobile Embedded Systems:

Mobile embedded systems we are using in everyday life. Embedded devices like cell phones, mobiles, digital cameras, mp3 players and personal digital assistants, etc. are the examples for this field. One of the limitations in this field is its resources and memory.

5. Small-scale:

By using the battery for power supply and 8/16 bit microcontroller we can develop small-scale embedded systems. For developing software for small-scale embedded systems, mainly we needed programming tools are an editor, assembler, cross assembler and integrated development environment (IDE).

6. Medium Scale:

These types of embedded systems design with a single 16 or 32-bit microcontroller, RISCs or DSPs. These types of embedded systems have both hardware and software complexities. For developing embedded software for medium scale embedded systems, the main programming tools are C, C++, JAVA, Visual C++, RTOS, debugger, source code engineering tool, simulator, and IDE.

7. High-end embedded systems:

These types of embedded systems have enormous hardware and software complexities that may need ASIPs, IPs, PLAs, scalable or configurable processors. They are used for high-end applications that need hardware and software Co-design and components which needed to assemble in the final system.

Based on above classifications, here you can find different fields of embedded systems.

Embedded Systems in Smart Cards, Missiles and Satellites

  • Security systems
  • Telephone and banking
  • Defense and aerospace
  • Communication

Embedded Systems in Consumer Electronics

  • Digital Cameras
  • Set-top Boxes
  • High Definition TVs
  • DVDs
  • Etc..
In here see some applications
  • Embedded System for Auto Intensity Control
  • Embedded System for Industrial Temperature Control
  • Application of Embedded System for War Field Spying Robot
  • Speed Control Unit Designed for a DC Motor
  • Thyristor Power Control with IR Remote
  • Three Phase Solid State Relay with ZVS
  • Auto Power Supply Control from 4 Different Sources: Solar, Mains, Generator &Inverter to ensure No Break Power
  • IOT Based Energy Meter Reading Through Internet
  • Internet (IOT) of Things based underground cable fault distance display using GSM
  • Electronic passport system using smart card
  • Patient body temperature monitoring remotely using Internet of Things (IoT)
  • Power saver for street light using high sensitive LDR managed by Arduino
  • GSM based prepaid energy meter
  • Automatic meter reading system using Zigbee
  • A notice board display system using voice commands using an Android phone
  • Home automation using voice commands
  • Solar based electric fencing system to deter cattle
  • Embedded System for Detecting Rash Driving on Highways
  • Embedded System for Traffic Signal Control System
  • Application of Embedded System for Vehicle Tracking
  • Application of Embedded System for Home Automation System
  • Thyristor Controlled Power for Induction Motor
  • Lamp Life Extender by ZVS (Zero Voltage Switching).
  • Industrial Power Control by Integral Cycle Switching without Generating Harmonics.
  • Industrial Battery Charger by Thyristor Firing Angle Control

Embedded Systems in Automobiles and in telecommunications

  • Motor and cruise control system
  • Body or Engine safety
  • Entertainment and multimedia in car
  • E-Com and Mobile access
  • Robotics in the assembly line
  • Wireless communication
  • Mobile computing and networking

Embedded Systems in Peripherals & Computer Networking

  • Displays and Monitors
  • Networking Systems
  • Image Processing
  • Network cards and printers

The above applications are covered in the small area of real-time applications. But nowadays embedded is one of the most widely used applications anywhere in the world. We all know that these systems are extremely fabulous systems that play important role in many devices, equipment’s, industrial instrumentation and home appliances irrespective of circuit complexity.

For understanding, we will explain some of the fields here.

  • Automotive
  • Automotive
  • Home automation
  • Industries automation
  • Medical
  • Defense/aerospace
  • Consumer electronic
  • IOT
  • Networking
  • Telecom
  • Navigation/fleet management
  • Artificial intelligent / machine learning

There are 1000’s of applications of the embedded system, few of them are

  • Embedded System for Detecting Rash Driving on Highways
  • Embedded System for Traffic Signal Control System
  • Application of Embedded System for Vehicle Tracking
  • Application of Embedded System for Home Automation System
  • Thyristor Controlled Power for Induction Motor
  • Lamp Life Extender by ZVS (Zero Voltage Switching).
  • Industrial Power Control by Integral Cycle Switching without Generating Harmonics.
  • Industrial Battery Charger by Thyristor Firing Angle Control

Embedded Systems in Automobiles and in telecommunications

  • Motor and cruise control system
  • Body or Engine safety
  • Entertainment and multimedia in car
  • E-Com and Mobile access
  • Robotics in the assembly line
  • Wireless communication
  • Mobile computing and networking

Embedded Systems in Peripherals  & Computer Networking

  • Displays and Monitors
  • Networking Systems
  • Image Processing
  • Network cards and printers

Embedded Systems in Medical domain

  • Heart rate monitor
  • Life support system
  • Ventilator
  • Pulse monitor
  • Insulin injector
  • Blood Testing Equipment’s

Embedded Systems in Industrial Automation

  • Process controller
  • HMI display
  • PLC Device
  • Automatic Temperature controller
  • Automatic Roti maker

Embedded Systems in Home Automation

  • Automatic temp controller
  • Voice controller Lights
  • Door locks, video wall

Embedded System in Navigation/Fleet Management

  • GPS-GSM navigation device
  • Vehicle monitoring system
  • Kids tracking system


  • Real-time air pressure monitoring device
  • Pacemaker
  • Home automation and real-time monitoring

Embedded Systems in Aerospace/ Defense

  • Missiles control
  • Flight control/ Autopilot
  • Satellite navigation

Embedded Systems in Power Domain

  • Power factor correction
  • UPS/Invertor/ Online UPS
  • Auto switchover device
  • Load Control
  • Streetlight control

In Each field there are many companies are working worldwide, of the famous companies are BOSCH, Continental, Tata Motors, Mercedes, Rockwell, Honeywell, happiest mind, Toshiba, Alstom, UST Global, L&T, Linkwell telesystem, Aptiv, Continental, Infosys, Wipro, sasken communication etc.

Professional Training Institute- Provider of Embedded Systems Courses in Bangalore

How to enter into embedded system world: In our college, we are not having a good subject which covers the embedded system in details. Here in Professional Training Institute provider of embedded systems courses in Bangalore, we focus on practical hands-on training, which enables our student to learn deeply embedded system concepts with hands-on experience. We believe in learning by doing. So come and explore the new learning world for a great future.

More Tags: embedded training in Bangaloreembedded Linux training in Bangalore | embedded courses in Bangalore | IoT training in Bangalorec programming classes in BangaloreLinux device driver training in Bangalore



Your Name*
Phone Number*
Email Address*